Introduction
You have recently bought a Mathews Chill R bow and want to know more about it. The bow is very good on paper so it is difficult to find drawbacks. However, you are a passionate shooter and want to know more about it.
Do not worry, we got you covered!
So what are the common Mathews Chill R problems?
Mathews Chill R was released in 2014 which is quite similar to the Chill version. Some common problems of Mathews Chill R are spongy back wall, a small length of the draw. It also includes cam lean issues.
We know that this isn’t enough to troubleshoot your Mathews Chill R. We’ve got a detailed guide on the problems, so read along to find out.
So why wait? Let’s start!
What Are The Common Mathews Chill R Problems?- Explained With Solutions
Although the Mathews Chill R is a revamped version of Mathews Chill, it comes with very few drawbacks. These may be common for some ravin r10 users as well. But the good news is that these can be fixed easily.
Given below are the problems and some solutions that we provided=
Problem 1: Spongy Back Wall (String Creep)
This is a major issue with Mathew Chill R. The lightest that you can pull is at the same distance as the back wall. Light pull might end up in string creep. String creep should be avoided to aim and shoot at the right spot.
It happens when your shoulder collapses while you are holding the bow at full draw. Happens also when the string hand moves forward and removes you from the back wall. This results in a bad aim.
That is why people choose a solid back wall instead of a spongy back wall. Creeping off a spongy back wall is easier than creeping off a solid back wall.
Solution
Since Mathews Chill R has a spongy black wall so the string creep problem may arise. To avoid the string creep problem people tend to use cable stop to stop the bow from missing an arrow. You can also use am arrow
The cable stop is similar to the solid back wall. If you are looking to fix string creep with it then you can do it yourself. You can ask a professional for help if you are experienced with this type of work.
Small Length Of Draw
Matthew bows are mostly designed for specific draw lengths for specific models. There can be no draw length adjustments done for these bows when you buy them the first time.
These bows have draw lengths ranging from 23-30 inches and are mainly comfortable for smaller-stature people.
It has a shorter draw length designed for smaller stature shooters who can control it better.
Due to the smaller length of the draw, some people find it difficult to aim. There are vibration issues if the string is drawn in the wrong manner.
Solution
The draw length however can be adjusted after you buy it. The draw length can be changed using an Allen Wrench. The length of the Allen Wrench should be either 3/12 inches or 7/32 inches.
You can purchase Allen Wrenches from the recommended products below:
| Product 1 | |
| Product 2 |
These are the best ones in the market. And you can use this without any worries!
Draw length changes are made using the Allen wrench. Adjust the limb bolt on the bolt equally. Move the limb bolt clockwise to increase the length and move anti-clockwise to decrease it.
Moreover, you can also check if using an arrow puller helps to increase your draw length. This often helps with accuracy and length.
Cam Lean
When the string rubs over the edge of the cam. This is a very common problem of Mathews Chill R models and the floating yoke design makes it cam lean.
The bow will be very smooth and quiet for the first few days. Over daily usage, Matthews will develop the sounds and they will lose their accuracy.
To detect a cam lean bow, pick an arrow at first. Lay the arrow against one of the edges of the cam keeping the string parallel to it.
The bow has cam lean when the arrow crosses the string or it moves away from the string.
Solution
Every manufacturer uses different kinds of cams systems. Mathews Chill R has spacers attached.
Look for spacers in the bow which come in many different sizes. Put the bow on a straight edge and take the cam off.
Measure the width of all the spacers together. Then you can start tuning or take the cam lean whichever direction you want to take it. You might require professional assistance if you can’t do it on your own.
That was all about Mathews Chill R problems. Nevertheless, now you know how to fix the. So put on your quiver, carry your bow and arrows and get going!
FAQs
Question: Is Mathews Chill R a good bow?
Answer: The Mathews Chill R launched in 2014 is an extension of the Mcpherson series bow and has many features. It is not as fast as other bows but it is definitely a much quieter and smoother version.
Question: How do I know if my bow draw is too short or long?
Answer: Pull the string on the bow back and let it go as far as it can get. If it does not reach your head then the bow is too short. If it reaches your head and goes past the jaw then the string is too long.
Question: How long does it take to get a bow from Matthews?
Answer: It takes at least 4 to 6 weeks to get a bow. However, it might take a little longer if you are in a country where Matthews’s bow is not available.
Conclusion
Hope by now you have an idea of some of the common Mathews Chill R problems. If you are planning to buy or you have bought then these details will be helpful.
At the end of the day, it all boils down to the features you demand and the budget. Hence, pick the best bow which suits you.
See you soon!
