We may earn money or products from the companies mentioned in this post.
Intro
We all love a good outdoor hunting spree. For that, you’ve got yourself a carbon express piledriver 390 crossbow. But while using it you run into some problems.
Wondering how to fix the carbon express piledriver 390 problems?
You might face problems with the loading mechanism. Or the safety might be problematic. In this case, you have to look into the slider. Also, parts can be fragile, and the sight may be inaccurate. You can fix them by changing some parts, or going through some alignment processes.
Well, this is just a short preview. We have detailed all the problems and solutions in this article. So, what are you waiting for? Let's jump right in.
Problems You Might Face With Your Carbon Express Piledriver 390
Sometimes due to improper handling, your crossbow might run into some problems. But don’t worry, because it’s not something that you can’t fix.
Here we've detailed 5 possible problems you might run into with your piledriver 390.
Problem 1 of 5: Crossbow Failing To Cock
Sometimes the cocking mechanism might slip and it won’t fire. It happens when the string isn’t pulled all the way back. This inadequate force in the string can cause it to not cock properly.
Also, you might run into some issues when the safety mechanism is on.
Solution
To fix this, make sure the string is pulled properly. For that, you can invest in a good arrow puller. Using the hook, pull the string until you hear the cock. After that, you’ll have no problem firing it.
But in case you’re doing it by hand, it’s a little hard work. You have to do the same thing here as well. Pull the strings uniformly with your finger until you hear the cock.
Sometimes the problem can be with the strings. In that case, you have to replace it with a new one.
Make sure that the safety is off while firing. Check and grease the cocking mechanism for easy movement.
Problem 2 of 5: The Sight Isn't Accurate
In some cases, your sights may not be totally accurate from the box. It might be because of bent iron sights or a hasty setup. Moreover, the condition you’re hunting around also matters.
Inaccurate sights decrease your accuracy and lead to a waste of arrows. In turn, it makes your hunting adventure a frustrating ordeal.
Solution
To fix the iron sight you have to recalibrate it according to the user manual. But if the sight is bent or faulty, replacing it is the only solution. You can calibrate the new one according to the manual and start using it.
However, to solve it permanently you can buy a good archery sight that’s 3D. This will reduce your downtime while hunting and it's easier to operate. Moreover, it also gives you the best experience with proper sight.
Problem 3 of 5: Fails To Fire While Cocked And Loaded
This problem usually happens because the bolt isn’t seated properly. Hence, it slides forward or gets stuck. It leads to the failure to fire.
Moreover, at times the bolt can be faulty and this causes the issue.
Solution
To fix this, make sure if the bolt is seated properly. If misaligned, you have to recalibrate the alignment. For that, you need to tighten or loosen the screw holding the receiver.
Now, if the receiver rattles a lot, you’ll have to tighten the screw. However, you’ll have to loosen it if it’s too tight. Then, adjust it so that it’s on the same length as your bolt.
Check the bolt receiver has any defects or damage. In that case, you’ll have to replace it with a new one.
So, to help you out, we have some of the most recommended bolt receivers here:
| Product 1 | |
| Product 2 |
Now, go ahead and buy one of these and replace it!
Problem 4 of 5: Crossbow Limbs Get Cracks Or Snaps
Sadly, the crossbow limbs on this model aren’t durable enough. It might be a fault in the production. This causes the limbs to break after 40 or 50 shots.
Solution
To find if the bow’s limbs are the root of the problem, check for hairline fractures. It’s better to replace the limbs with a new one. Or you might hurt someone if it snaps.
Limbs made of g10 or carbon are very durable and will last a long time. Hence upon installation, you can hunt as much as you like!
Problem 5: Crossbow Might Fire While Having The Safety On
This might be a design flaw with this model which raised a lot of questions. However, the manufacturers have recalled the units that had this issue.
Solution
If your crossbow has this problem, contact the dealer or manufacturer immediately. They'll look into it and might exchange your faulty crossbow . If they do so, this might be a better deal!
That’s basically everything we know! Make sure to carefully follow the solutions to fix your problems. After that, you can go to your favorite place to hunt. However, if you’re in the Bay Area make sure if it’s legal to hunt there.
FAQs
Question: Are Carbon Express bolts any good?
Answer: Yes, Carbon Express bolts are top-of-the-line products. However, they don’t come with field tips. So, you might have to buy them separately. After that, you can install these as you normally would.
Question: How fast does carbon express piledriver 390 shoots?
Answer: A carbon express piledriver 390 can shoot up to 390 fps. It also delivers enormous energy of 142 ft. lbs. That too, with precision and making it one of the most powerful crossbows out there.
Question: What happens if an arrow’s spine is too weak or too stiff?
Answer: It will mess with your accuracy when you fire. There’s a chance of missing your target in the process. Plus, you might waste a lot of bows as well.
Conclusion
Finally, you've learned the solutions to the possible carbon express piledriver 390 problems. We hope you were able to fix your bow.
However, if you’re still facing issues, it’s better to get it checked by a professional.
Have a great day.
