Grim Reaper Broadhead Problems: How To Deal With Them

We may earn money or products from the companies mentioned in this post.

Introduction 

Hunting isn’t an easy job. Having precise timing and aiming is crucial. But to get that job done you need the right roles by your side. Which of course includes a high-quality broadhead. Such as the – grim reaper broadhead. 

But you can still face a few problems with it. So, what are the probable grim reaper broadhead problems? 

You can face a couple of problems with your grim reaper broadhead. Like- the blades failing to open, wrong targeting, unstable fletching, worn-out blades, etc. However, with the appropriate steps, all of these issues can be resolved.

We will dive into these problems in detail down below.

Let’s get into it!

Grim Reaper Broadhead Troubleshooting: 6 Ways

Grim reaper broadheads are undoubtedly one of the most popular broadheads in the market. But even this product can face problems. But the good news is, you can resolve them with some troubleshooting. 

So if you want to know about grim reaper broadheads’ problems, keep on reading. 

Problem 1: Failing To Open

While shooting if your grim reaper broadheads do not open, then the problem is in the bow. If your bow is not properly tuned the broadhead cannot function properly. 

Broadheads add drag to your arrow's front end, competing with fletching drag. This can magnify minor flaws in arrow flight. Causing broadheads to shoot differently than field points.

Solution

So what should you do? Request that a professional tune your bow at your local archery shop. This is also great advice when facing problems with your scorpyd crossbow. Broadheads should be no problem for a well-tuned bow.

Problem 2: Mis-matched Targeting 

Your broadhead may miss the main target or waver due to a couple of reasons. Like- cam timing, arrow straightness, arrow rest, nock tuning, operator error, etc. To solve the problem, you can try the techniques listed below.

Solution

First, double-check that your broadheads are rotating evenly. Spin each broadhead-mounted arrow using an arrow spinner. The idea is for the arrows to spin in a tight, wobble-free manner. If they wobble, move the broadhead to another arrow and spin it again. If you still can't get that arrow to spin true, toss the broadhead.

After that, have a look at your fletching. To stabilize your broadhead when shooting small fletching, you may need to use greater fletching or a four-fletch arrangement.

Problem 3: Inaccurate Shots

Sometimes straight fletching can lead to inaccuracy in shots. If you are facing inaccurate shots, then try helical fletching. The arrow spins quicker when it has a helical fletch. Allowing it to recover and stabilize faster. It results in more precise shots. This is an important arrow fletching option.

Solution

Choosing the fletching for your crossbow can be tough. Whether you're using shooting fingers or a release, your fletch should have a helical setting. When shooting broadheads, you never want a precisely straight fletch. 

Stabilization and targeting are much more accurate with helical fletching. The arrow spins like a well-thrown football thanks to a helical fletch. This reduces the broadhead's ability to direct the arrow.

Bowhunters who utilize small-diameter carbon shafts may have trouble with their fletching. In this scenario, choosing a straight offset of one to three degrees is the ideal option.

Problem 4: Wear And Tear 

After constant use, your grim reaper broadhead can take a toll on itself. The point of impact can be thrown off by nicked blades. 

After being shot, a broadhead can be reused, resharpened, or replaced, depending on its condition. Blades can be reused as long as they spin evenly and sharply. But of course, for that, maintenance is a necessity. 

Solution

Resharpening, on the other hand, might take material from the blade and weaken it. Replaceable blades have the huge advantage of never needing to be sharpened. 

Simply remove them and replace them with fresh, razor-sharp blades. Here are some that you can try using – 

Replacing materials of your tools is generally a good practice. You can also increase the effectiveness of your bow by using suitable crossbow lube.

Problem 5: Broadhead Not Flying At Long Distance 

It's frustrating when you can strike the target at 30 yards. But struggle to get close at 40 or 50 yards. Your arrow's front or center undoubtedly needs to be altered as long as your bow is in tune.

Solution

F.O.C. (Front of Center balance point) is less important in some bow-hunting scenarios (short-range shots). However, it is important in others (long-range shots). 

A low F.O.C. arrow will keep its trajectory better, but it will fly erratically. We recommend an arrow configuration with 10-15 percent F.O.C. for hunting settings and optimal accuracy.

Find your F.O.C. if you're experiencing difficulties with broadhead trajectory. Then play with it by shooting a broadhead with a lighter or heavier grain.

Problem 6: Mis-Aligning Broadhead

When you line your blades with your vanes, two things happen. You gain a little more pull. And the setup of each arrow you shoot is the same. That last element provides you the upper hand.  

Because it'll reveal whether your accuracy problems are due to the environment. Or it might be because of your shooting style. You can improve your marksmanship and correct shooting faults.

It's all about matching the blade angle to the fletching angle for broadhead alignment. Most modern arrows have a screw-on tip. So aligning the blade with the fletching can be challenging. 

Solution

You can sand down the end of the tip insert to help line the blades with the fletching. Or you can try inserting a little o-ring on the tip insert's end. In any case, you'll want to align those blades with the fletching.

With this set of solutions, you can resolve your grim reaper broadhead problems in no time. 

FAQs

Question: Can you sharpen Grim Reaper broadheads?

Answer: Yes, you can sharpen grim reaper broadheads. You can sharpen it whenever you want as long as you put it together properly.

Question: Do Grim Reaper broadheads fly like field points?

Answer: Yes, they do. If your bow and arrows are correctly tuned, you may expect field point accuracy with all Grim Reaper Broadheads.

Question: Can you reuse mechanical broadheads?

Answer: Yes, you can. After using it once on a subject, you can retrieve it and sharpen it. Then use it again. But do note, at one point sharpening won’t do the job. Then you need to buy a new one. 

Question: How many times can you use a broadhead?

Answer: Blades can be reused as long as they spin evenly and sharply. You can use it for a  deer around 3 to 4 times. But you can always get replacement blades as per your needs. 

EndNote

Now you know all about grim reaper broadhead problems and how to deal with them. So say hello to successful hunting by increasing the effectiveness of your broadheads. 

We hope you found this article insightful.

We tried our best to cover all relevant problems related to grim reaper broadheads. But you still may not find the solution to your problem. In that case, reach out to the manufacturer or a professional. 

Happy hunting!